1051 'Phase error L2'

  • There is an error in the AZ power feed because of a faulty connection or fuse defect

Device

 

Description

  

Class

  

Drive Behaviour

Motor brake control becomes active immediately. The brake will close independent if the motor is stopped.

Device Behaviour

System run-up aborted

Additional Error Information (AMK Service)
 

 

 

 

Error removal
  • Line connection L1, L2 or L3 at X01 not correct
  • Connection L1.2, L2.2 or L3.2 at X06 or X26 not correct
  • Check fuse F1, F2, F3 or F4, F5, F6