1445 'Current controller'
|
|||
|
Device |
|
||
|
Description |
|||
|
Class |
Error | ||
|
Drive Behaviour |
|||
|
Device Behaviour |
System run-up aborted |
||
|
Additional Error Information (AMK Service) |
|||
|
|
Info 1 |
0 |
Kpi in Q controller not workable |
| 1 | Kii in Q controller not workable | ||
| 3 | Kpi in D controller not workable | ||
| 4 | Kii in D controller not workable | ||
| 5 |
"ID34151 Kp current Q" = 0; "ID34152 Kp current D" ≠ 0 |
||
|
6 |
Current adaptation slope Kpi in Q controller too large |
||
|
7 |
Current adaptation slope Kii in Q controller too large |
||
|
8 |
Application threshold current adaptation ID34177 'Lower threshold current adaption'> ID34178 'Upper threshold current adaption' |
||
|
100 |
Model-based current controller is not possible. Only for synchronous machines |
||
|
Gerät |
KU- / KW-R03 |
||
| Info 1 | 2 |
"ID34051 Kp current D" = 0; "ID34052 TN current D" ≠ 0 |
|
|
Error Removal |
Recheck parameters:
Info 1 = 100: Deactivate model-based current control
|
||
