Technical data

Motor type:	Synchronous servo motor with permanent magnet
Ambient temperature:	+5 to +40°C. At higher ambient temperatures of up to maximum 60ºC, the rated data must be reduced by 1% per 1 K temperature increase.
Installation height acc. to EN 60034-1 (IEC 60034-1):	Up to 1000 m above sea level (NHN).
Humidity:	Maximum 85% relative humidity, no condensation.
Protection class acc. to EN 60034-5 (IEC60034-5):	IP 54 Higher protection classes are indicated on the data sheet or are available on request. IP 65 for: DD5 / DT5 / DTK5 / DT6 / DD7 / DT7 / DP7 / DTK7 / DD10 / DT10 / DP10
Rated data:	Relative to the temperature rise in windings, in Kelvin: DD and DT motors: 80 K DP motors: 100 K DA motors: see motor data sheet Here the motor is mounted on a 500 mm x 500 mm x 10 mm steel flange that approximates the thermal properties at the machines and systems as closely as possible.
Vibration acc. EN 60068-2-6:	20g (55..2000 Hz)
Shock acc. EN 60068-2-27:	100g
Insulation class of the stator winding acc. to EN 60034-1 (IEC 60034-1) DIN 57530:	F (maximum permissible continuous temperature 155 °C)
Temperature monitoring acc. to EN 60034-11 (IEC 60034-11):	PTC thermistor, cold resistance approx. 150-800 Ohm or KTY 84 temperature sensor
Motor bearing:	Ball bearing, lubricated-for-life; else observe the information on motor/motor data sheet
Axial runout, radial runout acc. to (IEC 60072-1):	Tolerance N (normal)
Balance quality grade acc. to DIN ISO 1940:	see motor data sheet Motors with feather key are balanced with full key quality grade. Motors which are balanced with half key it is mentioned in the motor data sheet "Halbkeil / half key"
Vibration quality acc. to DIN ISO 2373:	N
Vibration severity grade acc. to EN 60034-14:	Grade A is maintained up to the rated speed
Paint:	RAL 9005, jet black, matt
Sound pressure level:	acc. to DIN EN ISO 1680
Cooling:	Depending on motor type: Convection-cooled, liquid-cooled
Model type acc. to EN 600034-7 (IEC 60034-7):	IM B5
Flange dimensions acc. to EN 60072 Flange fit: Shaft fit: Precision acc. to DIN 42955 tolerance class:	j6 k6, DA motors: g6 N
Shaft end acc. to DIN 748-3 (IEC 60072-1):	Smooth shaft, optionally with feather key acc. to DIN 6885 Motors with feather key are balanced with full key quality grade.
Motor encoder:	Integrated
Brake:	Optional integrated motor holding brake

Ambient temperature:

+5 to +40°C. At higher ambient temperatures of up to maximum 60ºC, the rated data must be reduced by 1% per 1 K temperature increase.

Installation height acc. to EN 60034-1 (IEC 60034-1):

Up to 1000 m above sea level (NHN).

Humidity:

Maximum 85% relative humidity, no condensation.

Protection class acc. to EN 60034-5 (IEC60034-5):

IP 54

Higher protection classes are indicated on the data sheet or are available on request.

IP 65 for:

DD5 / DT5 / DTK5 /

DT6 /

DD7 / DT7 / DP7 / DTK7 /

DD10 / DT10 / DP10

Rated data:

Relative to the temperature rise in windings, in Kelvin:

DD and DT motors: 80 K

DP motors: 100 K

DA motors: see motor data sheet

Here the motor is mounted on a 500 mm x 500 mm x 10 mm steel flange that approximates the thermal properties at the machines and systems as closely as possible.

Vibration acc. EN 60068-2-6:

20g (55..2000 Hz)

Shock acc. EN 60068-2-27:

100g

Insulation class of the stator winding acc. to EN 60034-1 (IEC 60034-1) DIN 57530:

F (maximum permissible continuous temperature 155 °C)

Temperature monitoring acc. to EN 60034-11 (IEC 60034-11):

PTC thermistor, cold resistance approx. 150-800 Ohm or

KTY 84 temperature sensor

Motor bearing:

Ball bearing, lubricated-for-life; else observe the information on motor/motor data sheet

Axial runout, radial runout acc. to (IEC 60072-1):

Tolerance N (normal)

Balance quality grade acc. to DIN ISO 1940:

see motor data sheet

Motors with feather key are balanced with full key quality grade. Motors which are balanced with half key it is mentioned in the motor data sheet "Halbkeil / half key"

Vibration quality acc. to DIN ISO 2373:

N

Vibration severity grade acc. to EN 60034-14:

Grade A is maintained up to the rated speed

Paint:

RAL 9005, jet black, matt

Sound pressure level:

acc. to DIN EN ISO 1680

Cooling:

Depending on motor type: Convection-cooled, liquid-cooled

Model type acc. to EN 600034-7 (IEC 60034-7):

IM B5

Flange dimensions acc. to EN 60072

Flange fit:

Shaft fit:

Precision acc. to DIN 42955 tolerance class:

j6

k6, DA motors: g6

N

Shaft end acc. to DIN 748-3 (IEC 60072-1):

Smooth shaft, optionally with feather key acc. to DIN 6885

Motors with feather key are balanced with full key quality grade.

Motor encoder:

Integrated

Brake:

Optional integrated motor holding brake