Technical Data

Motor type:	Synchronous servo motor with permanent magnet
Ambient temperature:	+5 to +40°C. At higher ambient temperatures of up to maximum 60ºC, the rated data must be reduced by 1% per 1 K temperature increase.
Installation height acc. to EN 60034-1 (IEC 60034-1):	Up to 1000 m above sea level.
Humidity::	Maximum 85% relative humidity, no condensation.
Protection class acc. to EN 60034-5 (IEC60034-5):	IP 54 Higher protection classes are indicated on the data sheet or are available on request.
Rated data:	Relative to the temperature rise in windings, in Kelvin: 80 K Here the motor is mounted on a 500 mm x 500 mm x 10 mm steel flange that approximates the thermal properties at the machines and systems as closely as possible.
Vibration acc. EN 60068-2-6:	20g (55..2000 Hz)
Shock acc. EN 60068-2-27:	100g
Insulation class of the stator winding acc. to EN 60034-1 (IEC 60034-1) DIN 57530:	F (maximum permissible continuous temperature 155 °C)
Temperature monitoring acc. to EN 60034-11 (IEC 60034-11):	PTC thermistor, cold resistance approx. 150-800 Ohm or KTY 84 temperature sensor
Motor bearing:	Angular contact ball bearings, spherical roller bearing
Axial runout, radial runout acc. to (IEC 60072-1):	Tolerance N (normal)
Balance quality grade acc. to DIN ISO 1940:	G 2,5
Vibration quality acc. to DIN ISO 2373:	N
Vibration severity grade acc. to EN 60034-14:	Grade A is maintained up to the rated speed
Paint::	RAL 9005, jet black, matt
Sound pressure level::	acc. to DIN EN ISO 1680
Cooling:	Depending on motor type: Convection-cooled, liquid-cooled
Model type acc. to EN 600034-7 (IEC 60034-7):	IM B5
Flange dimensions acc. to EN 60072 Flange fit: Shaft fit: Precision acc. to DIN 42955 tolerance class:	h7 / j6 h7 N
Motor encoder:	Integrated
Brake:	Optional integrated motor holding brake

Ambient temperature:

+5 to +40°C. At higher ambient temperatures of up to maximum 60ºC, the rated data must be reduced by 1% per 1 K temperature increase.

Installation height acc. to EN 60034-1 (IEC 60034-1):

Up to 1000 m above sea level.

Humidity::

Maximum 85% relative humidity, no condensation.

Protection class acc. to EN 60034-5 (IEC60034-5):

IP 54

Higher protection classes are indicated on the data sheet or are available on request.

Rated data:

Relative to the temperature rise in windings, in Kelvin: 80 K

Here the motor is mounted on a 500 mm x 500 mm x 10 mm steel flange that approximates the thermal properties at the machines and systems as closely as possible.

Vibration acc. EN 60068-2-6:

20g (55..2000 Hz)

Shock acc. EN 60068-2-27:

100g

Insulation class of the stator winding acc. to EN 60034-1 (IEC 60034-1) DIN 57530:

F (maximum permissible continuous temperature 155 °C)

Temperature monitoring acc. to EN 60034-11 (IEC 60034-11):

PTC thermistor, cold resistance approx. 150-800 Ohm or

KTY 84 temperature sensor

Motor bearing:

Angular contact ball bearings, spherical roller bearing

Axial runout, radial runout acc. to (IEC 60072-1):

Tolerance N (normal)

Balance quality grade acc. to DIN ISO 1940:

G 2,5

Vibration quality acc. to DIN ISO 2373:

N

Vibration severity grade acc. to EN 60034-14:

Grade A is maintained up to the rated speed

Paint::

RAL 9005, jet black, matt

Sound pressure level::

acc. to DIN EN ISO 1680

Cooling:

Depending on motor type: Convection-cooled, liquid-cooled

Model type acc. to EN 600034-7 (IEC 60034-7):

IM B5

Flange dimensions acc. to EN 60072

Flange fit:

Shaft fit:

Precision acc. to DIN 42955 tolerance class:

h7 / j6

h7

N

Motor encoder:

Integrated

Brake:

Optional integrated motor holding brake