EMC-compliant wiring

• Metallic conductive housing of products sufficiently protects incoming and outgoing electromagnetic radiation
• Use shielded cables as short as possible for power cables and signal cables
• Connect the cable shield on both sides according to EMC (e.g. use EMC cable glands)

• For motors with a terminal box, you must apply the shield to the PE connection in the terminal box by drilling together the shield, pressing it into a cable lug and insulating with a heat-shrinkable sleeve.

• Lay the power cables and signal lines separated from one another with space
• Separate the undisturbed area (mains connection) and the disturbed area (drive components) from one another with space