PE connection

Danger to life from electrical shock!

In the event of an interruption to the PE connection, avoid touching the casing because life-threatening levels of voltage may be present!

Steps to prevent:

• EN 61800-5-1 requires that the devices be firmly connected on the power side.
• The PE conductor must have a cross-section of at least 10 mm² or must have a second PE connection with a cross-section at least equal to the mains feeder (cf. EN 61800-5-1).

• iC: The PE conductor is connected by a ring cable lug an a M5 screw to the iC housing
• The PE is connected by the power supply