ID530 'Clamping torque'

Supported hardware:

KW-R06 / KW-R16 / KW-R07 / KW-R17 / iX / iC / iDT5 / iX(-R3) / iC(-R3) / iDT5(-R3) /  ihXT /  KW-R24-R / KW-R25 / KW-R26 / KW-R27 /

Sphere of action:

DRIVE

Default value:

1000

Access:

READING / WRITING

Scale:

0.1

Temporarily changeable:

YES

Unit:

% MN

Data length:

2 byte

Min. value:

-

Signed:

NO

Max. value:

-

Format:

DEC

    

List:

NO

    

 

The 'Clamping torque' is effective with the command ID149 'Cmd position stop'. Siehe ID149 'Cmd position stop'.