PLC programming

The startup of AMKAMAC A series PLC controllers is described in the device description 'Controllers A4 / A5 / A6' (Part no. 202975)

 

You will get guidance and hints for PLC programming in the following documents:

• Basic knowledge AMK PLC programming in structured text (Part no. 204019)

  This documentation describes the introduction in programming according to IEC 61131-3 with the programming software CoDeSys and the AMK function libraries. It explains the various modules, variables, data types and the instruction codes of the programming language Structured Text.

• Software description AFL - AMK function libraries, (Part no.205795) includes AFL - AMK Function Library, part 1 standard function blocks and AFL - AMK Function Library, part 2 application blocks

  The AMK Function Library contains standard function blocks which offer simple access to any standard functions of the controllers, power supplies and drives. The application blocks of the AMK Function Library offer further PLC functions for the drive control, e. g. print mark control or NC motion.

You can get the AMK Function Library with the AMK order no. O877.